Lopi - Avalon Wood Stoves - Middle T Baffle Support
#99900250 Baffle support rear "T" bar - Two 17-7/8" long 1-1/2" x 1-1/2" x 1/4" thick angles welded back to back.
Designed for Following Lopi and Avalon Stoves
- Lopi Endeavor
- Lopi Revere
- Lopi 380-NT
- Lopi X-nt
- Lopi 1750
- Avalon 1750
Baffle Removal and Replacement
1.Push the front firebricks up and feed them forward, guiding them out the door. Repeat for the rear firebricks.
2 The baffle supports rest on support tabs.
3 The bypass support and damper are difficult to remove and should only be removed if necessary. Remove the rear secondary air tube (see the following section for instructions). Slide the bypass support forward until the bypass rod can be disconnected from the bypass damper. Slide the damper forward and remove. The bypass support is removed by sliding it forward and rotating it downwards (the bypass holder fits very snug in side the firebox and is very heavy, making it difficult to remove). The bypass gasket rests on the side and rear air channels. Try not to damage it when removing the bypass holder.
1 Review Hide Reviews Show Reviews
Perfect fit, original equipment quality.