Hearthstone Bennington Wood Stove - Stainless Steel Baffle Support
1) Place the Stainless Steel Baffle Support back into the Bennington.
2) Carefully lift the ceramic baffle off the burner tubes approximately one inch. (Be very careful, the ceramic board is fragile after the stove is burned).
3) Place the Stainless Steel Baffle Support over the first burner tube and under the ceramic board, with the tab sliding down behind the tube. (The two outer tabs on SS Baffle Support will point forward and rest on grooves in the side casting.
4) Pull the SS Baffle Support down to rest on the burner tube. The ceramic board should come to rest on the support and tubes as well. If it does not, gently pull it down (see figure 3 for the proper placement when installed)