Lopi - Avalon Wood Stove - 99900251 Front S Baffle Support
Designed for the below Model Stoves
- Lopi Endeavor
- Lopi Revere 2004-2019
- Lopi 380-NT
- Lopi X-NT 1993-2004
- Lopi 1750
- Avalon 1750
Baffle support front "S" bar - 17-3/4" long 1-1/2" x 1-1/2" x 1/4" angle with 17-3/4" long 2" x 3/16" formed deflector bar (with 60 degree bend).
Baffle Removal and Replacement
1.Push the front firebricks up and feed them forward, guiding them out the door. Repeat for the rear firebricks.
2 The baffle supports rest on support tabs.
3 The bypass support and damper are difficult to remove and should only be removed if necessary. Remove the rear secondary air tube (see the following section for instructions). Slide the bypass support forward until the bypass rod can be disc onnected from the bypass damper. Slide the damper forward and remove. The bypass support is removed by sliding it forward and rotating it downwards (the bypass holder fits very snug in side the firebox and is very heavy, making it difficult to remove). The bypass gasket rests on the side and rear air channels. Try not to damage it when removing the bypass holder.
1 Review Hide Reviews Show Reviews
Perfect fit, original equipment quality.