Jotul F 3 CB Baffle Plate

Product Description

Jotul F 3 CB Wood Stove  -  Replacement Secondary Air Baffle Assembly
#153683
Replaces Jotul part # 103670
17.5" Wide   X    8.5" Deep sides  /  9.25" Deep center

Installation instruction:
1. Remove venting from the top of the stove if equip.
2. Remove the top of the stove by removing the top set screws on the underside of the top of the stove, Carefully lift the top off of the stove and set aside
3. Remove the two top bolts from the top front corners of the baffle
4. Remove the two rear bolts of the baffle (these bolts are located on the back of the stove, you will have to remove the heat sheild from your stove if it is equip with one)
5. Remove the old baffle and install the new baffle, reinstalling all bolts
6. Inspect the 3/8" gasket on the bottom side of the top casting before reinstalling, replace if needed:  6 feet of 100038 3/8" Gasket  or   Gasket Kit 157050
7. Reinstall top of stove
8. Re-connect venting