HearthStone Gas Stove - Blower Kit 93-57010
Heat larger areas with the addition of fan kit from Hearth Stone.
This Blower is Designed for use on the following models
Santa Fe 8761
Tucson DV 8701
IMPORTANT NOTE: Use this kit on any of the stove models listed above. Do not use it on the previous versions of these models: Santa Fe 8760, Champlain 8300, Tucson DV 8700, or the Stowe 8320.
93-57010 KIT CONTENTS:
(1) Blower Assembly
(1) Hanger Mount (5930-125)
Zip Bag Contents:
(1) Control Knob (7200-602)
(1) L-Bracket (5930-120)
BLOWER OPERATION: The blower is activated when the snap switch heats up (about 120 degrees F). It will take several minutes for the heat of the stove to activate the snap switch. A rheostat controls the blower fan speed. The rheostat knob is located on the right hand side of the blower housing. Turn the knob clockwise to turn the blower on. The fan is on the highest setting when it is first turned on. Continue to turn the knob clockwise to reduce the fan speed until it reaches its lowest setting. If the fan does not operate at the lowest setting, the rheostat requires adjustment. Contact your dealer for rheostat adjustment. To turn the blower off, turn the knob fully counterclockwise until it clicks into the off setting.