HearthStone Wood Stove Blower Kit
For use with the Following models
HearthStone Heritage 8021 & 8022 Wood Burning Stoves
Castleton Wood Burning Stove
Tribute Wood Bring Stove
The blower for the Heritage 8021/Tribute 8040 must be used in conjunction with the accessory rear heat shield (Heritage 8021 - PN 90-68210) (Tribute 8040 - PN 90-68400) for mounting and in order to force the heated air forward over the stove’s top.
A snap switch located on the top of the blower housing activates the blower. It will take several minutes for the heat of the stove to activate the snap switch. A rheostat controls the blower fan speed. The rheostat knob is located on the right hand side of the blower housing. Turn the knob clockwise to the on position. The fan is on the highest setting when it is first turned on. By continuing to turn the knob clockwise the fan movement will be reduced until it reaches its lowest setting. If the fan does not operate at the lowest setting, the rheostat will require adjustment. Contact your dealer for rheostat adjustment. To turn the blower off, turn the knob fully counterclockwise until it clicks into the off setting.
Be the first to
Leave a Review