HearthStone Clydesdale Wood Burning Insert
The Clydesdale fireplace wood-fired insert produces a combination of both power and beauty. The 2.4 cubic foot firebox produces 60,000 BTUs of heat and can heat up to 1,600 square feet. The thick soapstone panels that line the inside of the firebox give the Clydesdale the thermal mass that separates HearthStone stoves from other products. The combination of cast iron and soapstone will add several hours of heat life to the already strong burn time of up to 10 hours. The 2.4 cubic foot firebox Holds up to 48 lbs. of wood. The Clydesdale's firebox and large front door allows logs up to 22" in length to load easily.
Single air-intake lever/stove control:Responsive control - insert operation is easy, performance more consistent.
Unmatched fire viewing: The large front door allows an unobstructed view of the entire firebox. Primary, and secondary air combine for dazzling fire viewing on high, or low settings.
Non-catalytic combustion system that is EPA certified, clean burning, complete combustion provides more heat from less wood, greater efficiency, and reduced smoke and creosote build up.
Reversible front loading door: Front door easily converts to open from either the left, or right side to meet your specific installation needs.
- Mantle Heat Shield (optional): Allows more placement options; Insert can be installed in fireplaces with low or overhanging mantles because clearance requirements are reduced.
Blower with built-in thermostat and rheostat: Blower helps spread heat evenly throughout home; blower operates only when insert is at significant heat level.
Screen (optional): Allows for open door fire viewing. Enjoy the sounds of your fire too.
Surround caps (optional): Adds beauty to the installation, or use as a filler for raised firebox installations.
Surround extension (optional): 36" H x 59" W (aluminum)
- Emission: 3.2 gram/hr
- Glass Size: 22” x 11.25”(247²in)
- Approx weight: 550 lbs
- Log size: Up to 22 in
- Firebox Size: 2.4 cu.ft.
- Max BTU. output: 60,000
- Max Heating Area: 2,000 sq.ft.
- Minimum Fireplace Measurements (HxWxD): 22.25 x 31 x 15 in
- Standard Surround Size: 30" H x 47" W
Be the first to
Leave a Review